Mover XT2

Manoeuvring system for twin-axle caravans up to 2400 kilograms

100 per cent directional stability and ultimate precision – also on uneven surfaces
Extremely reliable and safe
Intuitive steering with the remote control
Maximum weight advantage of 20 kilograms thanks to highly efficient high-tech motors
5-year guarantee when retrofitted by an authorized Truma dealer

Special features

With Mover XT2, you can manoeuvre twin-axle caravans precisely and safely.

The Mover XT2 remote control is intuitive: use the slide control to accelerate smoothly and the control knob to steer.

The design concept, degree of innovation and functionality of the manoeuvring system were acknowledged with the Red Dot Design Award.

The German Design Award Special Mention 2015 recognises the special design quality of the Mover XT2.

More details about the Mover XT2 manoeuvring system

Mover XT2 effortlessly moves twin-axle caravans weighing up to 2400 kilograms. With the manoeuvring system, move your caravan to its position without any effort. With the control knob and slide control on the remote control you can steer and accelerate smoothly and in all directions without any jolts – thanks to time-tested Truma Dynamic Move Technology.

The Mover XT2 manoeuvring system has especially powerful motors that need very little battery capacity: with the Truma PowerSet light and an Optima battery, you can move your caravan for more than one hour – until it is in the optimum position. The brushless motors are also very light. The device and battery together save up to 20 kilograms.

You can move your caravan in a circle in just over two minutes, the radius is 17.5 metres. Because of its two axles, the caravan cannot be rotated around its own axis.

Handles inclines of up to ten per cent and normal levelling ramps (short-term loads)
Exact manoeuvring to the desired position
Precise coupling to the towing vehicle
Drive rollers are swivelled in and out at the push of a button
For twin-axle caravans up to 2400 kilograms

In connection with the manufacturer’s warranty of two years, the Truma Partner grants a parts warranty to air conditioning systems and Mover from Truma (“the product”) for an additional three years, so for years 3, 4 and 5 from the date of purchase, under the following conditions.

Man moving a caravan with a mover into a garage

Accurate parking in any space and in tight corners.

No rolling back or sliding: holds securely on upward and downward inclines up to 25%.

Manoeuvre safely on any surface: snow, gravel, grass or sand – can be used in any terrain.

Man using a remote control of a caravan mover

Manoeuvre effortlessly – with the convenient radio remote control

Durable and almost maintenance free: the sturdy housing protects the motor and gears from spray water and dirt.

Man couples caravan with a mover on a car

Start the vehicle with no jolts and couple accurately thanks to the precise positioning of the caravan.

Compare Truma manoeuvring systems for twin-axle caravans

—

FAQs

Downloads

Videos

{{filteredFaqs.length}} FAQ

{{filteredFaqs.length}} FAQs

Download List

{{amountDownloads}} Download

{{amountDownloads}} Downloads

{{downloadGroup.name}}

Service Videos

{{filteredVideos.length}} video videos

The video was not found.

To category

Accessories

Find suitable accessories.

Mud guard set for Mover manoeuvring systems	Is used when the original mudflaps no longer fit after installation of the Mover behind the axle. Including instructions and template to adapt mud guards.
Easy clicK terminal clamps for the battery	Connect and disconnect battery connections quickly and easily by hand. Suitable for all DIN and SAE connections. Suitable for currents up to 150 A at continuous load, 800 A at short-term load. Also suitable for Mover S Mover SR Mover SE Mover SE R Mover TE Mover TE R Mover TE R4
Mover spacer set 60 mm for height adjustment	To balance out the height of caravans with a frame height of < 140 to 80 mm. Suitable for Mover systems built after 05/12.
Adapter kit for AL-KO M frame to 1800 kg	To balance out frame edges for caravans with AL-KO M chassis with axial movement to 1800 kg maximum permitted weight.
Mover PowerSet with charger BC 10	Together with the suitable battery, provides the power for the Mover. Consists of the charger BC 10, terminal clamps, temperature sensor and battery cut-off switch.	Truma charger BC 10
Mover spacer set 30 mm for height adjustment	To balance out the height of caravans with a frame height of < 170 to 110 mm. Suitable for Mover systems built after 05/12.
Battery cut-off switch for more safety	Interrupts the circuit and prevents the risk of short circuits. Is connected to the positive pole of the battery. Also useful as an additional anti-theft device.
Low chassis kit for height adjustment	Low chassis kit for height adjustment To balance out the height of caravans with a frame height less than 80 mm (all Mover XT) or less than 110 mm ( Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV).
Low chassis kit short for height adjustment	To balance out the height of caravans with a frame height less than 80 mm (all Mover XTs) or less than 110 mm (Mover SX) and/or to bridge struts. If holes have to be drilled for installation on the chassis, in Germany the vehicle must be inspected by an official entity (TÜV).
Short mounting system	Alternative mounting if the Mover cannot be attached because of substructures or interfering edges. In Germany, a test certificate (TÜV) is required, apart from Mover XT and Mover SX.

print page back to top

Mover XT2

Manoeuvring system for twin-axle caravans up to 2400 kilograms

Special features

More details about the Mover XT2 manoeuvring system

{{singleProduct.data.teaserData.displayName}}

Compare Truma manoeuvring systems for twin-axle caravans

{{product.data.teaserData.displayName}}
{{product.data.teaserData.subline}}